Introducing the 2” Zirconia Plus Quick Change Discs featuring Active Grinding Aid by Black Hawk Abrasives. 2 Inch zirconia quick change sanding discs are designed for metal stock removal, blending, deburring, leveling, grinding, sealant corrosion removal, finishing and polishing on flat or contoured surfaces and due to their small diameter, they excel in confined or hard to reach spaces. Their small size also allows them to do detail work more effectively than a larger grinder. These 2 inch Zirconia discs with grinding aid are constructed with premium closed coat alumina zirconia grains which characteristically fracture throughout use continually producing a sharp point to deliver a faster cut-rate than aluminum oxide varieties. The zirconia alumina abrasive grains are resin over resin bonded which makes the abrasive moisture-resistant, harder, less flexible, heat-resistant and has superior grain retention then other bonding methods. Additionally, these 2” zirconia quick change sanding discs come equip with an active grinding aid which prevents loading, and reduces heat buildup, which not only protects the work piece from staining or burning but keeps the disc sharper for longer. These discs are built on a heavy-duty, y-weight, polyester backing with the versatile, plastic, Type R (Type III) male roll-on, roll-off attachment system comparable to (and compatible with) 3M Roloc™ quick twist-on, twist-off. These discs are meant to be used with a 2-inch backing pad that can then be fastened to any ¼” power drill or air grinding tool. Zirconia plus grinding aid quick change discs are commonly used in the auto collision repair industry, and by metal fabricators and welders, or really anyone working with metal. These 2 inch sanding discs with grinding aid are extremely effective on carbon steel, cast iron, titanium, aluminum, brass, bronze, copper or hard woods and can also be used on heat sensitive materials such as stainless steel, nickel alloys and cobalt alloys. These 2 inch black hawk zirconia plus quick change discs are available in 36 grit and 40 grit for high stock removal; 60 grit and 80 grit for moderate stock removal, sanding and surface preparation; and 120 grit for finishing and polishing.