(SOLD IN PACKS OF 5)
The 3” x 2” x ¼” Interleaf Mounted Flap Wheels by Black Hawk Abrasives features abrasive impregnated non-woven pieces and coated aluminum oxide sanding flaps in an alternating fan-like design centered around a 1/4" shank. The combination of the sponge like nylon webbing and the abrasive flaps gives this abrasive dual action capability. The non woven abrasives provides flexibility and the ability to polish while the abrasive flaps can remove material. These 3 inch mounted interleaf flap wheels attach easily to a die grinder or power drill and are ideal for jobs in harder to reach places or on contoured, irregular surfaces. These non-woven interleaf duplex wheels can be used on ferrous metals, non-ferrous metals, plastic, wood and fiberglass. Common applications of the 3” diameter by 2” thick mounted flap wheel include sanding inside of tubes or pipes, blending scratch patterns or parting lines, cleaning welds, edge deburring on extrusions, de-scaling heat treated aluminum, removing rust, and creating a satin finish polish on certain metals. The 3” x 2” x 1/4” Interleaved Mounted Flap Wheels are available in Green (Coarse: 80 grit – 120 grit), Red (Medium: 150 grit – 240 grit), and Grey (Fine: 400 grit – 600 grit).
Suitable For:
• Ferrous Metals
• Non-Ferrous Metals
• Stainless Steel
• Iron
• Brass
• Aluminum
• Plastic
• Wood
• Fiberglass
Uses Include:
• Deburring
• Deflashing
• Cleaning weld lines and weld splatter
• Removal of Rust
• Blending
• Finishing and Polishing
• Light Grinding
• Stock Removal
Use on:
• Die Grinder
• Power Drill
Specs:
• Dimensions = 3” (Diameter) x 2” (Wide) x 1/4” (Shank)
• Max RPM = 9,500
• Material = Non-Woven & Aluminum Oxide
• Grits = Green (Coarse: 80 grit – 120 grit), Red (Medium: 150 grit – 240 grit), and Grey (Fine: 400 grit – 600 grit)
