The 6-inch Nylon Wire Cup Brush with 5/8”-11 Arbor Hole by BHA was designed with versatility in mind. These 6” x 5/8” cup brushes can be used on all metals, wood, tile, plastic, PVC, stone and more. They excel at removing rust, stripping paint, removing glue, sealant, mill scale, oxidation, excess grout, and prepping truck beds for bed liner. Nylon wire cup brushes like BHA’s will conform to the work piece as opposed to getting snagged on protrusions so they can be used on uneven surfaces including those with nuts, bolts, brackets, or rivets without catching edges. The bristles are flexible allowing for them flex around imperfections. The 6 inch Nylon Cup Brush is capable of moderate to light stock removal depending on the grit selected.
Nylon cup brush consists of heat resistant, nylon bristles, impregnated with abrasive grains. As the wire brush is used and the nylon wears away the filaments reveal new sharp abrasives creating a longer more consistent useable life when compared to metal wire brush alternatives. These cup brushes come standard with a 5/8”-11 arbor hole make them compatible with most variable speed angle grinders, polishers and buffers.
These cup brushes can be used wet or dry, are non-sparking, and remain cooler than metal wire brushes during use which protects not only the work pieces but the brush itself. BHA offers the 6 inch nylon cup brush in 3 grits: Gray – Coarse (80 grit) for higher stock removal such as removing rust from iron. Red – Medium (120 Grit) for more moderate stock removal such cleaning and prepping surfaces for sprayable truck bed liner coatings. Blue – Fine (240 Grit) for light cleaning and blending such as removing paint from finished woods or work on fiberglass.
(SOLD INDIVIDUALLY)
Features:
• Non-shedding filament
• Non-sparking
• Will not corrode or rust (or create "after rust")
• Flexes around uneven surfaces such as nuts & bolts
• Can be used Wet or Dry
• Wide Sanding Surface Area
Suitable For:
• All Metals
• Wood
• Tile
• Plastics
• PVC
• Stone
• Cement
• Mortar
• Fiberglass
Uses Include:
• Rust removal
• Stripping paint
• Glue, sealant and other adhesive removal
• Bondo and body filler removal
• Scale and oxidation removal
• Excess grout removal
• Cleaning and prep for truck bed liner coating
Use on:
• Variable Speed Angle Grinder
• Variable Speed Buffer / Polisher
Specs:
• Style = Cup Brush
• Diameter = 6"
• Arbor Hole = 5/8"-11
• Max RPM = 6,500
• Material = Abrasive Impregnated Nylon Wire
• Grit = Gray (Coarse): 80 Grit, Red (Medium): 120 Grit, Blue (Fine): 240 Grit
We had great luck using this to sand/ buff a large custom log home
Five stars! I use the 80 grit brushes on a variable speed polish sander to re finish log homes. These are every bit as good as Osborn brushes and at a way better price point. Highly recommend!
I picked up a 7 inch grinder to run the brush, the brush holds up very well
The 6” brush is a bit much for my 4” angle grinder but it does work as good as the 4” brushes . It’s great for larger , flat surfaces and again , a great price.
