The M.K. Morse Company’s HD Thin Metal Reciprocating Saw Blade for Metal is setting the standard for metal cutting reciprocating saw blades on the market today. Each HD Thin Metal sawzall blade features state of the art bi-metal construction which combines a high-carbon steel body with cobalt-steel alloy teeth. The carbon steel body provides break-resistance and flexibility while the cobalt alloy teeth provide high speed cutting, heat resistance, increased hardness and maximum durability. On average, a bi-metal recip blade will outlast a standard carbon steel blade 10 times but, with the addition of the HD Thin Metal’s cobalt steel cutting edge these reciprocating blades will even outlast standard bi-metal blades, making them some of the longest lasting blades available anywhere. The HD Thin Metal metal reciprocating blade is the best choice for cutting any machinable metal up to ¼” (6.4 mm) in thickness and features an angled nose making it perfect for plunge cutting. Morse's HD Thin Metal Reciprocating Saw Blades have conventional shanks making them universally adaptable to standard reciprocating saws and sawzall’s of any brand.
The 8” x 3/4” x .035” HD Thin Metal Blade for Metal with 18 TPI is 8 inches long, .75” wide, .035” thick and has 18 Teeth Per Inch. This combination of specifications provides the following advantages: 8" blades are are more flexible then shorter blades of similar dimensions and can dissipate heat more easily due to the increased surface area. This flexibility also allows you to bend the blade when a flush cut is required. 8 inch long recip blades are the perfect size for cutting work pieces that are 5 to 6 inches wide (Your blade length should be 2" - 3" longer than the width of the material you are cutting to prevent slipping. Additionally, your blade should not be so much longer than your material or else wobbling and vibration can occur.) . The 3/4” width allows the blade to resist bending and vibration to further enhance its ability to create straighter, faster cuts. The .035” thickness is considered “standard” thickness and perfect for general purpose cutting. Saw saw blades with .035” thickness allows some flex. The .035” thickness also cuts faster than thicker blades, minimizes material loss, and leaves a small kerf on your work piece. Finally, 18 TPI is ideal for cutting metal at a moderate pace while leaving a smooth cutting area. Formerly known as "Master Cobalt" blades. MADE IN AMERICA.
Pack Size: 5 Recip Blades
Product Features:
Benefits:
Suitable For (Material):
Use on (Machine):
Specs:
